Introduction to product features
Powerful internal motion control function, which can complete
control modes such as position,
speed, torque and homing, and support i/o control and standard
Modbus RTU The protocol can
replace PLC or pulse module in some occasions to reduce the
application cost.
1 Support pulse command input and RS485 command input;
2 Adopt high-speed DSP chip, high servo response and higher
precision;
3 Rich multi-functional ports, supporting common Yin and Yang
connection;
4 Support 17 bit single turn absolute vaLue encoder;
5 Easy connection with touch screen (HMI)
Simplified control system
Save wiring
Parameter setting and status monitoring
6 Rs485 motion control with PLC
PLC comes with RS485 interface
Simple control and convenient programming
Save PLC pulse output points
Parameter:
Wiring diagram of position control mode
1. The internal +24v power supply voltage range is 20v~28v, and the
maximum working current is 100mA.
If an external 24V power supply is used, please connect the
external power supply +24v to pin 16 (COM),
and the external power supply 0V to pin 43 (e0v).
2. The user of do output power supply needs to provide it by
himself. The recommended
working powersupply voltage is DC24V, and the conduction voltage
drop of do port is about 2.4V.
Please pay attention to it in application.The maximum allowable
voltage of do port is DC30V
and the maximum allowable current is 50mA.
